#2020 ford f150 stereo upgrade software#
We are able to separate the frequencies using the DSP software on a tuning laptop. A passive crossover comes with component speakers to prevent the average person from accidentally blowing a speaker, by allowing only certain frequencies to play through to each speaker. When tuning the system using the Digital Signal Processor (DSP), having control of each speakers independently allows us to create a much more accurate image, but also we are not restricted by what the passive crossover is allowing us to feed to each speaker. We prefer to run the front speaker actively so we can better tune them individually. Since the subwoofer we were using required at least 300-400 watts RMS, we needed to use two separate amps on this build.
We wanted to ensure we had enough volume in the truck, so we wanted a speaker that could handle some power in the rears as well.Īdded amplifiers – We knew that we wanted to power the front speakers actively, which means that each tweeter and each door woofer gets their own channel, and the customer wanted rear speakers incorporated into the build. Replaced rear door speakers – We matched the rear speakers to the front and did the C5 6.5” coaxial speakers. We used the C5’s because they offer great performance and they matched up well with the amplifier we used. Replaced front door speakers – We replaced the front door speakers and dash speakers with the JL Audio C5 6.5” components. This truck sounded great and the image in the front was spot-on accurate.
#2020 ford f150 stereo upgrade full#
Throughout the consultation, I learned that the customer was a huge fan of JL Audio and had used JL in most of his previous systems, so we designed a full JL Audio system with plenty of power and bass to meet the client’s needs. We need to get to know you and your listening preference in order to make suggestions to get you the system you’re in search of. This is not uncommon for us to see during the discovery phase of the consultation. When we first jumped in his truck to listen to the factory Bang and Olufsen, he turned the volume all the way up and said it wasn’t loud enough.
He told us he wanted something with plenty of volume and good bass response. This customer came into our shop after having shopped at some other local places and not finding what he was looking for.
0 kommentar(er)
